Samsung DCS-816 - Page 120

SAMSUNG Programming
DCS-816 February, 1999
MMC 424 (Page 1 of 1 )
MMC: 424 S0 MAPPING
DESCRIPTION:
Generates a table by which an ISDN terminal number is mapped onto a BRI
STATION port.
For a detailed description and other MMC–related procedures, refer to the
section BRI Related MMC Procedure in this manual.
NOTE
For each BRI access, two adjacent ports are assigned. You need only map a number onto one of
the two ports. You can map only one port to each number. This means you can't use the same
number in more than one BRI access. However, more than one number can be mapped onto a port
and used in a BRI access.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 424
Display shows
[7801]S0 MAPPING
NONE
2. Dial an ISDN terminal number (e.g. 7803)
OR
Press UP or DOWN key to select the number
and press RIGHT soft key to move cursor
[7803]S0 MAPPING
NONE
3. Dial an ISDN station number (e.g. 703)
OR
Press UP or DOWN key to select the number
and press RIGHT soft key to move cursor
[7803]S0 MAPPING
703
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: MMC 419 BRI Option
MMC 423 S/T Mode