Samsung DCS-816 - Page 122

SAMSUNG Programming
DCS-816 February, 1999
MMC 428 (Page 1 of 1)
MMC: 428 ASSIGN TRUNK/TRUNK USE
DESCRIPTION:
Used to control whether a incoming trunk can dial calls for specific trunks.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 428
Display shows
[701] USE [702]
DIAL:YES
2. Dial the trunk number (e.g., 705)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key
OR
Press ANS/RLS to select all trunks
[705] USE [702]
DIAL:YES
3. Dial the trunk number (e.g., 708)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key
[705] USE [708]
DIAL:YES
4. Dial 1 for YES or 0 for NO
OR
Press UP or DOWN key to select YES/NO and
press RIGHT soft key to move cursor
[705] USE [708]
DIAL:NO
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: DIAL: Yes
RELATED ITEMS: None