SAMSUNG Programming
DCS-816 February, 1999
MMC 502 (Page 1 of 2)
MMC: 502 STATION–WIDE TIMERS
DESCRIPTION:
Allows certain station timer values to be changed on a per–station basis or for all
stations. It is not advisable to change these values without assistance from
Technical Support.
1 NO ANS FWD This timer controls how long the station will ring before
Forward on no answer takes place. (Range: 001– 255 sec.)
2 DTMF DUR. This timer governs the duration of DTMF digit which is
transmitted to an external VM system port. It is useful when
customising voice mail system. (Range: 100– 9900 msec.)
3 F–DGT DELY This timer is valuable for the system administrator to insert a
suitable delay for generating DTMF digits, for commencing
in-band integration. (Range: 100– 9900 msec.)
NOTE
It is reasonable for the system administrator to use trial and error to find a suitable value for 2 and 3
above according to the characteristics of the selected VM system.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 502
Display shows
[201] NO ANS FWD
010 SEC
→
_
2. Dial station number (e.g., 205)
OR
Press UP or DOWN key to select station and press
RIGHT soft key
OR
Press ANS/RLS to select all stations and press
RIGHT soft key
[205] NO ANS FWD
010 SEC
→
_
[ALL] NO ANS FWD
010 SEC
→
_
3. Enter new value (must be three digits) via dial
keypad (e.g., 020)
System will return to step 2
[205] NO ANS FWD
010 SEC
→
020
To Next Page
Loading...
