Samsung DCS-816 - Page 146

SAMSUNG Programming
DCS-816 February, 1999
MMC 601 (Page 1 of 2)
MMC: 601 ASSIGN STATION GROUP
DESCRIPTION:
The station groups that are available in this MMC provide more flexibility in the
usage of Uniform Call Distribution (UCD/ACD), AA GROUP and VM/AA
applications. A station, common bell, and ring page can be in more than one
group, but must all be the same ring type. There is a maximum of 16 members
per group.
NOTE
A device for announcement, if used, must provide a hookflash and return the call to the group. If a
station is in more than one group and attempts to use the In/Out of Group key, it will be removed
from all groups.
GROUP TYPE
0 NORMAL GROUP
1 VMAA GROUP Can only have distribute or sequential ringing.
2 UCD GROUP Has wrap–up capability.
3 AA GROUP Can only have distribute or sequential ringing.
FEATURE KEY
0 TYPE Group type (Normal, VM/AA, UCD, AA)
1 RING Ring mode
2 OVERFLOW Overflow time
3 GRP TRSF Recall time for transfering to group
4 NEXT PORT Overflow port
5 MEMBER Group member (e.g., station 202)
RING MODE
0 SEQUENTIAL The first idle station listed in the group will ring. If the
first is busy, the next idle station will ring.
1 DISTRIBUTE The first call will ring the first station listed in the group.
The next call will ring the next station listed in the
group.
2 UNCONDITION All the stations listed in the group will ring; busy
stations will receive off–hook ring.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry