Samsung DCS-816 - Page 147

SAMSUNG Programming
DCS-816 February, 1999
MMC 601 (Page 2 of 2)
ACTION DISPLAY
1. Press TRSF 601
Display shows
[500] STN GROUP
TYPE:NORMAL GRP
2. Dial group number (e.g., 505)
OR
Press UP or DOWN key to select group and press
LEFT soft key to move cursor to type of group
Dial group type (0–3, e.g., 1)
OR
Press UP or DOWN key to make selection and
press LEFT soft key to move cursor to TYPE
[505] STN GROUP
TYPE:NORMAL GRP
[505] STN GROUP
TYPE:VMAA
3. Dial feature option number (0–5, e.g., 1)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor to ring value
[505] STN GROUP
RING:SEQUENTIAL
4. Dial ring option (0–2, e.g., 1)
OR
Press UP or DOWN key to make selection and
press LEFT soft key to move cursor back to RING
or press RIGHT soft key to return to step 2
[505] STN GROUP
RING:DISTRIBUTE
5. Dial next feature option and continue
OR
Press UP or DOWN key to select option
OR
Press LEFT soft key to return to step 2
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: Group Type Normal Group
Ring Mode Sequential
Overflow Time 000 Sec
Grp Trsf Time 000 Sec
Next Port None
Group Member 500: First station
The others: None
RELATED ITEMS: MMC 203 Assign UA Device
MMC 204 Common Bell Control
MMC 211 Door Ring Assignment
MMC 406 Trunk Ring Assignment
MMC 601 Assign Station Group
MMC 602 Station Group Name