Samsung DCS-816 - Page 152

SAMSUNG Programming
DCS-816 February, 1999
MMC 604 (Page 1 of 1)
MMC: 604 ASSIGN STATION TO PAGE ZONE
DESCRIPTION:
Allows the technician to assign a keyset to any of the four internal paging zones
and all page (page plus ∗). The total number of keysets that can receive a page
is limited to 12. A keyset may be assigned to more than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as
“1” in a zone column, it will receive pages for that zone. If the keyset is flagged
as “0,” it will not receive pages for that zone. Keysets can receive pages for more
than one zone.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear entry
ACTION DISPLAY
1. Press TRSF 604
Display shows
ENTRY:STN :1234Q
01 :NONE:00001
2. Enter index number (01–12, e.g., 05) via dial
keypad
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
ENTRY:STN :1234 Q
05 :NONE:00001
3. Enter station number (e.g., 205) via dial keypad
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
ENTRY:STN :1234Q
05 : 205 :00001
4. Move cursor under page zone desired by
pressing UP or DOWN key and enter the digit 1
under zone (e.g. zone 2)
Press RIGHT soft key to return to step 2 to
continue with entries
ENTRY:STN :1234 Q
05 : 205 :01001
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: No stations assigned
All zone is set
RELATED ITEMS: None