Samsung DCS-816 - Page 154

SAMSUNG Programming
DCS-816 February, 1999
MMC 606 (Page 1 of 2)
MMC: 606 ASSIGN SPEED BLOCK
DESCRIPTION:
Provides a means of adding or deleting speed dial blocks to the system or an
individual keyset. With the ability to delete a block or blocks of speed dial, it will
not be necessary to waste these on such items as voice mail, DPIMs or stations
that do not require the ability to use speed dial.
The Free List shows how many bins are left to be assigned. One block has ten
(10) entries. DCS-816 has a maximum of 500 entries in a system: 300 for
System Speed while the rest can be allocated as personal numbers with a
maximum of 50 per–station. For example, if the System Speed block has been
assigned as 100 entries then 100 entries can be shared between the extensions.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry
TRSF To exit programming
ACTION DISPLAY
1. Press TRSF 606
Display shows
FREE LIST:30
SYSTEM:20
2. Press RIGHT soft key to advance cursor to next
line
FREE LIST:30
SYSTEM:20
3. Make a selection of SYSTEM or EXT using UP
or DOWN key and press RIGHT soft key to
advance cursor
FREE LIST:30
EXT201:1
4. Enter desired EXT number via dial keypad (e.g.,
205)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to advance cursor
FREE LIST:30
EXT205:1
5. Enter in valid number for bins (e.g., 0–5 for EXT
or 00–50 for SYSTEM)
OR
Press UP or DOWN key to make selection
OR
Press HOLD key to delete bin(s)
BUSY LIST:30
EXT205:5