SAMSUNG Programming
DCS-816 February, 1999
MMC 608 (Page 1 of 1)
MMC: 608 ASSIGN CLIP REVIEW BLOCK
DESCRIPTION:
Provides a means of adding or deleting CLIP review blocks to an individual
keyset. With the ability to delete a block or blocks of speed dial, it will not be
necessary to waste these on such items as voice mail, DPIMs or keysets that do
not have displays. The Free List shows how many bins are left to be assigned.
The system automatically assigns 10 bins to each keyset. Each keyset may be
assigned a maximum of 50 bins.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 608
Display shows
[201] REVIEW BLK
10 : 0180 FREE
2. Dial EXT number (e.g., 205)
OR
Use UP and DOWN to select station and press
RIGHT soft key to move cursor
[205] REVIEW BLK
10 : 200 FREE
3. Enter number of entries (e.g., 50)
OR
Press UP or DOWN to select
OR
Press HOLD key to delete bin(s)
[205] REVIEW BLK
50 : 0140 FREE
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: One bin of ten (10) entries
RELATED ITEMS: None
To Next Page
Loading...
