Samsung DCS-816 - Page 159

SAMSUNG Programming
DCS-816 February, 1999
MMC 700 (Page 1 of 1)
MMC: 700 COPY COS CONTENTS
DESCRIPTION:
Provides the flexibility so that the technician can create a copy of a selected class
of service or create another class of service options easily without the interruption
of an existing class of service.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
“ F” KEY Used to advance to MMC 701
ACTION DISPLAY
1. Press TRSF 700
Display shows
COPY COS ITEMS
COS 01 → COS 01
2. Dial selected COS to copy (e.g., 05)
OR
Press UP or DOWN key to select COS and press
RIGHT soft key to move cursor and advance to
next step
COPY COS ITEMS
COS 05 → COS 01
3. Dial target COS (e.g., 06)
OR
Press UP or DOWN key to select COS and press
RIGHT soft key to move cursor back to step 2
COPY COS ITEMS
COS 05 → COS 06
4. Press F key to advance to MMC 701 and press
RIGHT soft to advance cursor
COS CONTENTS(06)
TOLL LEVEL:A
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: MMC 701 Assign COS Contents