Samsung DCS-816 - Page 160

SAMSUNG Programming
DCS-816 February, 1999
MMC 701 (Page 1 of 3)
MMC: 701 ASSIGN COS CONTENTS
DESCRIPTION:
Similar to MMC 700 but does not allow a copy command. This MMC is primarily
used for the creation of a new class of service. If the feature of unsupervised
conference is allowed, a programmed CONF key must be available to allow
reentry into conference call.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
TOLL LEVEL OPTIONS
DIAL DIGIT TOLL LEVEL
0 A
1 B
2 C
3 D
4 E
5 F
6 G
7 H
ACTION DISPLAY
1. Press TRSF 701
Display shows
COS CONTENTS(01)
TOLL LEVEL:A
2. Dial in COS (e.g., 06)
OR
Press UP or DOWN key to select COS and press
RIGHT soft key to move cursor to toll level
COS CONTENTS(06)
TOLL LEVEL:A
3. Dial toll level (e.g., 2—see above list)
OR
Press UP or DOWN key to select new level of
TOLL
OR
Press RIGHT soft key to advance to COS options
COS CONTENTS(06)
TOLL LEVEL:C
4. Dial in COS option (e.g., 11—see option list
below)
OR
Press UP or DOWN key to select option and
press RIGHT soft key to move cursor
COS CONTENTS(06)
12:DND :YES