Samsung DCS-816 - Page 175

SAMSUNG Programming
DCS-816 February, 1999
MMC 710 (Page 1 of 1)
MMC: 710 LCR DIGIT TABLE
DESCRIPTION:
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing
call placement. This table works in conjunction with LCR ROUTE TABLE, LCR
TIME TABLE and LCR MODIFY DIGITS TABLE. There is a maximum of 300
entries with a digit string length of 10 numerical digits. This system automatically
maintains entered digit strings in numerical order. The characters Q and # are also
accepted for use with feature codes.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 710
Display shows
LCR DIGIT (001)
DIGIT:
2. Dial LCR entry (e.g., 005)
OR
Press UP or DOWN to select entry and press
RIGHT soft key to move cursor
LCR DIGIT (005)
DIGIT: _
3. Enter LCR digit string via the dial keypad and
press RIGHT soft key
OR
Press LEFT soft key to return to step 1
LCR DIGIT (005)
DIGIT:305426
4. Enter digit length (00–31)
Cursor will move to RT (route selection)
Enter RT (1–16)
OR
Press LEFT soft key to return to length value
Valid entry will return you to step 1
LCR DIGIT (005)
LENGTH:10 RT:01
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: 001:01426 002:01459 003:01893
004:0345 005:0800 006:0941
007:1 008:121 009:2
010~016:3~9
RELATED ITEMS: MMC 712 LCR Route Table