SAMSUNG Programming
DCS-816 February, 1999
MMC 711 (Page 1 of 2)
MMC: 711 LCR TIME TABLE
DESCRIPTION:
This table gives the flexibility to the system, through the LCR ROUTES, to allow
calls placed at any given time of day to use the least cost trunk route that is
available. When LCR ROUTE ADVANCE is allowed, it is possible for calls to be
placed on more expensive trunks on any given time of day. There are four possible
time entries per day; the start time of the next time period is the end time of the
previous time period.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
FEATURE KEYS
DAY VALUE TIME BAND LCRT
SUN 0 A 0 LCRRT 1
MON 1 B 1 LCRRT 2
TUE 2 C 2 LCRRT 3
WED 3 D 3 LCRRT 4
THU 4
FRI 5
SAT 6
ACTION DISPLAY
1. Press TRSF 711
Display shows
LCR TIME (SUN:A)
HHMM:0000 LCRT: 1
2. Dial day of week (SUN–SAT, e.g., WED)
OR
Press UP or DOWN to make day selection and
press RIGHT soft key
LCR TIME (WED:A)
HHMM:0000 LCRT: 1
3. Dial time band (A–D, e.g., B)
OR
Press UP or DOWN to make selection and press
RIGHT soft key
LCR TIME (WED:B)
HHMM:0000 TIME: 1
To Next Page
Loading...
