Samsung DCS-816 - Page 183

SAMSUNG Programming
DCS-816 February, 1999
MMC 714 (Page 2 of 3)
The # key can be used for special characters: #, space, &, !, :, ?, ., %, $, –, <, >, /,
=, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 714
Display shows
DID DIGIT (01)
DGT:2✱✱
2. Enter valid index number (e.g. 05) via dial keypad
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
DID DIGIT (05)
DGT:
3. Enter the DDI number (e.g. 4603831) via dial
keypad and press RIGHT soft key to move cursor
(Max. digits is 12)
DID DIGIT (05)
DGT:4603831
4. Enter day destination via dial keypad (e.g. 204)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
DID DIGIT (05)
→ D:204 N:
5. Enter night destination via dial keypad (e.g. 204)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
DID DIGIT (05)
→ D:204 N:204
6. Enter 1 for YES (call waiting) or 0 for NO (no call
waiting)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
DID DIGIT (05)
CW: NO DELETE:0
7. Enter digits to be deleted via dial keypad
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
DID DIGIT (05)
CW: NO DELETE:3
8. Enter name using above table and press RIGHT
soft key to return to step 2
DID DIGIT (05)
NAME:_
9. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC