Samsung DCS-816 - Page 189

SAMSUNG Programming
DCS-816 February, 1999
MMC 718 (Page 1 of 1)
MMC: 718 MY AREA CODE
DESCRIPTION:
This MMC is used for handling CID received from ISDN line for Memory or CID
Review dial use.
In some situation, crude CLI from network is not the type of later dialing purpose.
There is a content which identifying what type of zonal call is being progressed, i.e.,
Type of Number specified in ETSI.
According to Specification, Types of numbers could be:
COUNTRY Call from International.
AREA Call from Intra/Inter Area in a country.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 718
Display shows
MY AREA CODE
AREA :
2. Enter 0 for COUNTRY or 1 for AREA
OR
Press UP or DOWN keys to make selection and
press RIGHT soft key to move cursor
MY AREA CODE
COUNTRY :
3. Enter area code (max. 4 digits) via dial
keypad(e.g.,2) and
Press RIGHT soft key to move cursor back to step
2.
MY AREA CODE
AREA :2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: COUNTRY: International call code for selected country at MMC 812
RELATED ITEMS: CID REVIEW SAVE/DIAL
CID ABANDONED LIST