Samsung DCS-816 - Page 190

SAMSUNG Programming
DCS-816 February, 1999
MMC 720 (Page 1 of 1)
MMC: 720 COPY KEY PROGRAMMING
DESCRIPTION:
Provides a tool for duplicating key assignment from one keyset to another. This
can be done on a per–station basis or on all stations, but not on a group of stations.
One limitation is that the original and target keysets must be of the same type (i.e.
same number of buttons.)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 720
Display shows
[201] COPY KEY
FROM:NONE
2. Enter the station number to copy to (e.g., 205)
OR
Press UP or DOWN keys to make selection and
press RIGHT soft key to move cursor
[205] COPY KEY
FROM:NONE
3. Enter station number to copy from (e.g., 203) and
cursor returns to step 2
OR
Press UP or DOWN keys to make selection
[205] COPY KEY
FROM:203
4. Press RIGHT soft key to return to step 2
OR
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: MMC 107 Key Extender
MMC 721 Save Station Key Programming
MMC 722 Station Key Programming
MMC 723 System Key Programming