Samsung DCS-816 - Page 193

SAMSUNG Programming
DCS-816 February, 1999
MMC 722 (Page 2 of 4)
4. Using table above, press dial key pad number to
make selection
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to advance cursor to step 5
to enter extender, if required, or to return to step 2
[205] KEY (MAST)
18:NONE → GPIK_
5. If required, enter extender (e.g.,03)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to return to step 2
[205] KEY (MAST)
18:NONE → GPIK03
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
24–Button Keyset
01:CALL1 02:CALL2 03:NONE 04:NONE 05:NONE 06:TG9
07:NONE 08:NONE 09:NONE 10:NONE 11:NONE 12:NONE
13:NONE 14:NONE 15:NONE 16:NONE 17:NONE 18:NONE
19:CONF 20:MUTE 21:GPIK01 22:PAGE 23:CBK 24:MSG
12–Button Keyset
01:CALL1 02:CALL2 03:NONE 04:NONE 05:NONE 06:TG9
07:CONF 08:MUTE 09:GPIK1 10:PAGE 11:CBK 12:MSG
6–Button keyset
01:CALL1 02:CALL2
03:NONE 04:NONE
05:NONE 06:TG9
48–Button Add–On Module
01:DS 13:DS 25:DS 37:DS
02:DS 14:DS 26:DS 38:DS
03:DS 15:DS 27:DS 39:DS
04:DS 16:DS 28:DS 40:DS
05:DS 17:DS 29:DS 41:DS
06:DS 18:DS 30:DS 42:DS
07:DS 19:DS 31:DS 43:DS
08:DS 20:DS 32:DS 44:DS
09:DS 21:DS 33:DS 45:DS
10:DS 22:DS 34:DS 46:DS
11:DS 23:DS 35:DS 47:DS
12:DS 24:DS 36:DS 48:DS
Programmable Key Assignments
AAPLAY AUTO ATTND MESSAGE PLAY
AAREC AUTO ATTND MESSAGE RECORD
AB ABSENCE
ABAND ABANDON DATA