Samsung DCS-816 - Page 222

SAMSUNG Programming
DCS-816 February, 1999
MMC 740 (Page 1 of 1)
MMC: 740 STATION PAIR
DESCRIPTION:
Allows a station to be assigned as a ‘ secondary’ to a ‘ primary’ DGP station
(keyphone) in the system. This will allow all features to be set or cancelled
from either station, and both will ring when the ‘ primary’ receives a call.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 740
Display shows
[201] PRIMARY
SECONDARY:NONE
2. Enter the primary station number via dial keypad
(e.g. 201)
OR
Press UP or DOWN to select and press RGHT
soft key
[201] PRIMARY
SECONDARY:NONE
3. Enter the secondary station number via dial
keypad (e.g. 205)
OR
Press UP or DOWN to select and press RGHT
soft key
[201] PRIMARY
SECONDARY:205
4. Press TRSF button to store and exit
OR
Press SPK button to store and advance to next
MMC
DEFAULT DATA: None
RELATED ITEMS: None