Samsung DCS-816 - Page 226

SAMSUNG Programming
DCS-816 February, 1999
MMC 802 (Page 1 of 2)
MMC: 802 CUSTOMER ACCESS MMC NUMBER
DESCRIPTION:
Allows customer to have access to certain MMCs. For example, it is advised that
the customer have access to MMC 102, Call Forward, for call forwarding but it is
not advised that the customer have access to MMC 710, LCR Digit Table, for
LCR dial plans.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRSF 802
Display shows
CUSTOMER ACCESS
100:STN LOCK:YES
2. Enter desired MMC number via dial keypad (e.g.
102)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
CUSTOMER ACCESS
102:CALL FWD:YES
3. Dial 1 for YES or 0 for NO
OR
Press UP or DOWN key to make selection and
press LEFT soft key to return to step 2 to make
additional entries
CUSTOMER ACCESS
102:CALL FWD:NO
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: See table on next page
RELATED ITEMS: None