Samsung DCS-816 - Page 229

SAMSUNG Programming
DCS-816 February, 1999
MMC 804 (Page 2 of 2)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear entry (when valid)
ACTION DISPLAY
1. Press TRSF 804
Display shows
SYS I/O PORT (1)
SERVICE:PC–MMC
2. Enter in desired port via dial keypad (e.g. 2)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
SYS I/O PORT (2)
SERVICE:SMDR
3. Enter parameter option from the above option
list via dial keypad (e.g. 1)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
SYS I/O PORT (2)
BAUD:9600 BPS
4. Enter desired value via dial keypad (e.g. 4800
baud)
OR
Press UP or DOWN key to display value and
press RIGHT soft key to return to step 2
SYS I/O PORT (2)
BAUD:4800 BPS
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: Service Port 1 PCMMC
Port 2 SMDR
Baud Rate 9600 bps
Char Length 8 bits
Parity None
Retry Count 03
Stop Bit 1 bit
Wait Time Port1 3000 msec
Port2 300 sec
DSR Check Off
RELATED ITEMS: PCMMC Section
SMDR