Samsung DCS-816 - Page 230

SAMSUNG Programming
DCS-816 February, 1999
MMC 805 (Page 1 of 2)
MMC: 805 TX LEVEL AND GAIN
DESCRIPTION:
Allows the system administrator to set the base level of TX volume and the gain
control for nine time–switch connect types.
There are eight (8) volume levels which can be controlled by the VOL UP and
DOWN key on the keyset. However, there are 9 possible levels in the system.
With this MMC, users can select the desired eight levels.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 805
Display shows
TX LEVEL CONTROL
LEVEL 0 → 1
2. Press UP or DOWN key to select TX LEVEL
CONTROL TX GAIN CONTROL
Press RIGHT soft key to go to the volume level or
TSW
option
TX LEVEL CONTROL
LEVEL 0 → 1
3a. Press RIGHT soft key to go to the volume level
OR
Press UP or DOWN key to go to next volume
level
TX LEVEL CONTROL
LEVEL 1 → 2
3b. Press RIGHT soft key to go to the TSW type
OR
Press UP or DOWN key to go to next TSW type
TSW GAIN CONTROL
SLT → ATRK:0dB
4a. Enter desired volume data via dial keypad
OR
Use UP or DOWN key to scroll data
TX LEVEL CONTROL
LEVEL 1 → 3
4b. Press UP or DOWN key to select TSW gain data
and
press RIGHT soft key to go to 3b
TSW GAIN CONTROL
SLT → ATRK:+2dB
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC