Samsung DCS-816 - Page 93

SAMSUNG Programming
DCS-816 February, 1999
MMC 401 (Page 1 of 1)
MMC: 401 C.O./PBX LINE
DESCRIPTION:
Used to select the mode of the C.O. line. If the PBX mode is chosen, this allows
PBX access codes to be recognised, thus allowing more complete toll restriction
(call barring). This mode is assigned on a per–trunk basis. If a trunk requires the
use of the RECALL key, it must be set to PBX mode.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 401
Display shows
[701] PBX LINE
CO LINE
2. Dial trunk number (e.g., 704)
OR
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
cursor
OR
Press ANS/RLS to select ALL
[704] PBX LINE
CO LINE
[ALL] PBX LINE
?
3. Dial 1 for PBX or 0 for C.O.
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
[704] PBX LINE
PBX LINE
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA: All Trunks C.O. Line
RELATED ITEMS: None