SAMSUNG Programming
DCS-816 February, 1999
MMC 402 (Page 1 of 1)
MMC: 402 TRUNK DIAL TYPE
DESCRIPTION:
Used to determine the dialling type of each C.O. line. There are two options:
pulse (rotary dial) , dual tone multi-frequency (DTMF).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 402
Display shows
[701] DIAL TYPE
DTMF TYPE
2. Dial trunk number (e.g., 704)
OR
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
the cursor
OR
Press ANS/RLS to select ALL
[704] DIAL TYPE
DTMF TYPE
[ALL] DIAL TYPE
?
3. Dial 1 for PULSE , 0 for DTMF
OR
Use UP or DOWN to scroll through options
Press RIGHT soft keys to return to step 2
[704] DIAL TYPE
DIAL PULSE TYPE
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: All trunks DTMF
RELATED ITEMS: MMC 501 System-Wide Timers
MMC 503 Trunk–Wide Timers
To Next Page
Loading...
