Samsung DCS-816 - Page 95

SAMSUNG Programming
DCS-816 February, 1999
MMC 403 (Page 1 of 2)
MMC: 403 TRUNK TOLL CLASS
DESCRIPTION:
Assigns toll class level assignments on a per–trunk or all–trunk basis in a day or
night condition. The options for toll level will follow either the station class or the
class of service defined in MMCs 702, Toll Deny Table, and 703, Toll Allowance
Table. The toll classes that are available are listed below with their entry numbers.
ENTRY NUMBER CLASS TYPE DESCRIPTION
0 F–STN Follow station toll restriction
1 CLS–A Follow toll class A (Unrestricted)
2 CLS–B Follow toll class B
3 CLS–C Follow toll class C
4 CLS–D Follow toll class D
5 CLS–E Follow toll class E
6 CLS–F Follow toll class F
7 CLS–G Follow toll class G
8 CLS–H Follow toll class H (All restricted)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 403
Display shows
[701] TOLL CLASS
D:F–STN N:F–STN
2. Dial trunk number (e.g.704)
OR
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
the cursor
OR
Press ANS/RLS to select ALL
[704] TOLL CLASS
D:F–STN N:F–STN
[ALL] TOLL CLASS
D:? N:?
3. Enter day toll class (e.g. 2 for CLS–B)
OR
Press UP or DOWN to scroll through toll
classes and press RIGHT soft key to move the
cursor
[704] TOLL CLASS
D:CLS–B N:F–STN