Santec TSL-710 - Page 103

Tunable Semiconductor Laser TSL-710
7-49
2. TSL-710 specic command detailed description
Specic commands in Command set 2 are described in detail as follows.
*IDN? Syntax *IDN?
Description A query to identify the device; places strings of device information
   suchasthename,rmware,andversionintheoutputqueue.
Parameter None
 Response SANTEC,TSL-710,########,****.****
    #eld=serialnumberofthedevicein8digits.
    *eld=rmwareversionas4digits+.(period)+4digits.
Example *IDN?
→ SANTEC,TSL-710,06020001,0001.0000
LO Syntax LO
 Description SetsONtheLD.
Parameter None
Response None
LF Syntax LF
 Description SetsOFFtheLD.
Parameter None
Response None
WA Syntax WA<value>
 Description Setstheoutputwavelength.Whenparameterisnotspecied,reads 
   outthewavelengthcurrentlyset.
 Parameter Range: MinimumsettingwavelengthtoMaximum(nm)
   Step: 0.0001(nm)
 Response Currentlysetvalue.Avalueisreturnedbothonsettingandonreading.
 Example Setsoutputwavelengthto1560.123nm.
    WA1560.123
Reads out the currently set value
WA
→ 1560.000
   Indicatesthatthecurrentlysetwavelengthis1560nm.
FQ Syntax FQ<value>
 Description Setstheoutputfrequency.AsetunitisTHz.
   Whenparameterisnotspecied,readsoutthefrequencycurrentlyset.
 Parameter Range: MinimumsettingfrequencytoMaximum(THz)
   Step: 0.00001(THz)