Santec TSL-710 - Page 113

Tunable Semiconductor Laser TSL-710
7-59
GD Syntax GD<value>
 Description SetsthecommanddelimiterforGPIBcommunication.Whenparameteris
   notspecied,readsoutthecurrentlysetvalue.
Parameter 0:CR
1:LF
   2:CR+LF
   3:Nodelimiter,EOIissent.
Response Currently set value
 Example SetsthecommanddelimitertoCR+LF.
GD2
BL Syntax BL<value>
 Description Setsthespeedofserialcommunication(Baudrate).Whenparameteris
   notspecied,readsoutthecurrentlysetvalue.
 Parameter 0:2400bps
   1:4800bps
   2:9600bps
   3:19200bps
Response Currently set value
 Example Setsbaudrateto19200bps.
BL3
SD Syntax SD<value>
 Description Setsthecommanddelimiterforserialcommunication.Whenparameteris
   notspecied,readsoutthecurrentlysetvalue.
Parameter 0:CR
1:LF
   2:CR+LF
Response Currently set value
 Example SetsthecommanddelimitertoCR+LF.
SD2