Sartorius BioPAT Trace - LED Status Messages

BioPAT
®
Trace | Multi Trace Operating Instructions 109
Operation
8.4 LED Status Messages
In order to be able to read the device status independently of the operating
software on a connected PC directly on the BioPAT
®
Trace | Multi Trace, the
various operating statuses can be read using the LEDs on the front panel.
Thetable “8.4 Status messages of the LED display” provides an overview of
the LED signals:
Status Action LED1
(green)
LED 2
color
LED 2
status
Startup and decommissioning
Boot process on white on
Stop on cyan on
Filling on cyan flashes
Cleaning on magenta |
cyan
flashes
Preliminary measure-
ment
on green |
cyan
flashes
Weighing
Weighing loaded on green on
Weighing unloaded on green flashes
Measurement breaks
Readiness Readiness on yellow on
Interval standstill on yellow flashes
Rinsing cycles
Changing the
medium
on magenta on
Rinsing probe on magenta flashes