84 BioPAT
®
Trace | Multi Trace Operating Instructions
Operation
If you want to create a new file, select the menu
item “New”.
If you want to load and display measured data
from an old file, select the menu item “Load…”.
The saved files can be easily processed, e.g. in
Excel. For notes on importing see Chapter “8.5.5
Import Data to Excel”, page 113.
8.3.1 Menu Item “Device”
The user can choose from four sub-items:
“Connect”, “Startup”, “Cleaning” and “Stop”.
8.3.1.1 Connect
By selecting the “Connect” menu sub-item, you
have the option to connect a new BioPAT
®
Trace|
Multi Trace. To do so, you must enter the IP
address of the device.
If you have started the software by clicking on
the start icon
on the desktop, the standard
IPaddress 192.168.120.231 will already be
displayed.
If your device has been assigned a different IP
address (e.g. by your network administrator),
then enter that address here.
If you would also like to be prompted with this
new address automatically in the future, proceed
as described in Section “6.6 Changing the Start
Settings”, page 67.
To Next Page
Loading...
