Sartorius BioPAT Trace - Changing the Start Settings

BioPAT
®
Trace | Multi Trace Operating Instructions 67
Initial Installation
6.6 Changing the Start Settings
If you changed the IP address at a later time, you
should also update the startup settings in the
program shortcut of the startup icon so that the
device will continue to connect automatically.
Todo so, complete the following steps:
t Switch the screen view to your desktop.
t Click on the start icon with the right mouse
button.
t Select the menu item “Properties”.
t Enter your new IP address at the place
indicated in the figure.
y Confirm the change with “Apply” and then
“OK”