26 BioPAT
®
Trace | Multi Trace Operating Instructions
Design and Function
4 Design and Function
4.1 Setting Up the Device
The BioPAT
®
Trace | Multi Trace is an online analysis system in a compact
metal housing. Communication with the user is driven by an external com-
puter. As shown in the following figures, the front and side panels are
equipped with the elements of the pre-assembled tubing set for analysis.
The actuator and sensor components are located on the outside of the
housing. A standard or sample solution is fed into the analysis system by a
pump(1b). One of the pinch valves (3) allows a selection of the solutions to
be pumped. The buffer stream is driven by the upper pump(1a). A particle
filter (2) removes smaller particles and air bubbles from the buffer stream.
1a
1b
2
3
3
3
Fig. 6: Components
Pos. Component Pos. Component
1 a | b Pump cassettes (2 pcs.) 3 Pinch valves (3 pcs.)
2 Particle filter
To Next Page
Loading...
