2
Every effort has been made to ensure that the material herein is complete and
accurate. However, the manufacturer is not responsible for any mistakes in printing
or faulty instructions contained in this book. Notification of any errors or misprints will
be received with appreciation.
For further information regarding a particular installation, operation or maintenance
of equipment, contact the manufacturer or your local representative or distributor.
REVISION HISTORY
A2 Apr 2007 F/W version 24.1.4 or higher
Added GE EGD protocol setup
A3 Sep 2007 F/W version 24.1.9 or higher
Added the AX8 Analog Expander setup
A4 June 2008 F/W version 24.1.10 or higher
Added DST start/end hour setup.
Added the current unbalance trigger.
Added PROFIBUS option.
Fixed EN50160 Harmonic voltage compliance statistics record structure.
Fixed 16-bit I1-I3 harmonic angles addresses.
A5 July 2009 F/W version 24.2.4 or higher.
CT primary current extended to 50,000A.
Added four-quadrant kvarh and imported/exported kVAh energy counters.
Added instrument transformer correction.
A6 Nov 2009 F/W version 24.2.5 or higher.
Added TCP event notification client.
Added GPRS setup and communication counters.
A7 April 2013 F/W version 24.3.1 or higher.
Added event-controlled waveform recording option.
Added fault recorder setup and fault log file response block structure.
Modified event notification message structure.
Modbus is a trademark of Schneider Electric.
To Next Page
Loading...
Need help?
General
