Satec PM174 User Manual

92
Format Code Value Description Notes
0xF300 Setup reset (set by default)
0xF400 Setup changed
0xF500 RTC set
Setpoint Operation Events
0xE100-0xE10F Setpoint operated (low byte = setpoint ID)
0xE200-0xE20F Setpoint released (low byte = setpoint ID)
Setpoint Action Events
See F14 Setpoint action ID
Data Point ID
Data Locations
0x03 Data memory
0x04 Factory setup
0x05 Access/Password setup
0x06 Basic setup
0x07 Communications setup
0x08 Real-time clock
0x09 Digital inputs setup
0x0A Pulse counters setup
0x0B AO setup
0x0E Timers setup
0x10 Event/alarm setpoints
0x11 Pulsing setup
0x12 User assignable register map
0x13 Programmable Min/Max log setup
0x14 Data log setup
0x15 File/Memory setup
0x16 TOU energy registers setup
0x18 TOU daily profiles
0x19 TOU calendar
0x1B RO Setup
0x1C User selectable options
0x1F DNP 3.0 class 0 map
0x20 DNP 3.0 options setup
0x21 DNP 3.0 events setup
0x22 DNP 3.0 event setpoints
0x23 Calibration registers
0x24 Date/Time Setup
0x25 Net setup
0x26 AI setup
0x27 Waveform log setup
0x28 PQ log setup
0x29 Fault log setup
F21
0x2B-0x3F Reserved
Event Type ID
Setpoint Events
0x0000 SP: Generic setpoint event
0x0001-0x0010 SP1-SP16: Setpoint #1-#16 event
PQ Events (IEEE 1159)
0x0100 PQE: Generic PQ event
0x0102 PQE11: Impulsive transients
0x010C PQE211: Sag, instantaneous
0x010D PQE212: Swell, instantaneous
0x010F PQE221: Interruption, momentary
0x0110 PQE222: Sag, momentary
0x0111 PQE223: Swell, momentary
0x0113 PQE231: Interruption, temporary
0x0114 PQE232: Sag, temporary
0x0115 PQE233: Swell, temporary
0x0117 PQE31: Interruption, sustained
0x0118 PQE32: Undervoltage
0x0119 PQE33: Overvoltage
0x011A PQE4: Voltage imbalance
0x011D PQE52: Harmonics
0x011E PQE53: Interharmonics
0x0121 PQE6: Voltage fluctuations (flicker)
0x0122 PQE7: Frequency variation
F22
Fault Events V24.3.1 and higher

Satec PM174 Specifications

General

Brand	Satec
Model	PM174
Category	Measuring Instruments
Language	English