SATO CG2 Series - Page 70

Section 6: General Specifications
Page 6-2 CG2 Series Operator Manual
MODEL NAME
CG208 DT/ CG208TT CG212 DT/ CG212TT
MEDIA (Be sure to use media manufactured or certified by SATO)
Type
Direct Thermal / Thermal Transfer depending on print model (DT or TT)
Roll stock or Fan-fold
Wind Direction Roll stock: Face In or Face out
Roll and Core Diameter
Maximum outer diameter: 130 mm (5.12”) with Inner core diameter: 40 mm (1.5”)
Maximum outer diameter: 115 mm (4.5”) with Inner core diameter: 26.9 mm (1”)
* Use the paper roll and roll core based on the above sizes to fit inside the printer.
* Use an optional external label unwinder for the paper roll which outer diameter is 130mm
and above.
Fanfold Max. stack height 100 mm (3.94”) (external supply)
Size
Label
Continuous
Cutter
Tear-off
Dispenser
Pitch : 6 to 600 mm (0.23” to
23.62”)
Pitch including liner : 9 to
603 mm (0.35” to 23.74”)
Width : 12 to 60 mm (0.47”
to 2.36”)
Width including liner : 15 to
63 mm (0.59” to 2.48”)
Pitch : 22 to 600 mm (0.87”
to 23.62”)
Pitch including liner : 25 to
603 mm (0.98” to 23.74”)
Width : 12 to 60 mm (0.47”
to 2.36”)
Width including liner : 15 to
63 mm (0.59” to 2.48”)
Pitch : 12 to 600 mm (0.47”
to 23.62”)
Pitch including liner : 15 to
603 mm (0.59” to 23.74”)
Width : 12 to 60 mm (0.47”
to 2.36”)
Width including liner : 15 to
63 mm (0.59” to 2.48”)
Pitch : 22 to 100 mm (0.87”
to 3.94”)
Pitch including liner : 25 to
103 mm (0.98” to 4.06”)
Width : 12 to 60 mm (0.47”
to 2.36”)
Width including liner : 15 to
63 mm (0.59” to 2.48”)
Label
Continuous
Cutter
Tear-off
Dispenser
Pitch : 6 to 400 mm (0.23”
to 15.75”)
Pitch including liner : 9 to
403 mm (0.35” to 15.87”)
Width : 12 to 60 mm (0.47”
to 2.36”)
Width including liner : 15
to 63 mm (0.59” to 2.48”)
Pitch : 22 to 400 mm (0.87”
to 15.75”)
Pitch including liner : 25
to 403 mm (0.98” to 15.87”)
Width : 12 to 60 mm (0.47”
to 2.36”)
Width including liner : 15
to 63 mm (0.59” to 2.48”)
Pitch : 12 to 400 mm (0.47”
to 15.75”)
Pitch including liner : 15
to 403 mm (0.59” to 15.87”)
Width : 12 to 60 mm (0.47”
to 2.36”)
Width including liner : 15
to 63 mm (0.59” to 2.48”)
Pitch : 22 to 100 mm (0.87”
to 3.94”)
Pitch including liner : 25
to 103 mm (0.98” to 4.06”)
Width : 12 to 60 mm (0.47”
to 2.36”)
Width including liner : 15
to 63 mm (0.59” to 2.48”)