Section 6: General Specifications
Page 6-4 CG2 Series Operator Manual
MODEL NAME
CG208 DT CG212 DT CG208 TT CG212 TT
SENSING
Gap/Tag-hole (Transmissive) Sensitivity Adjustable
I-Mark (Reflective) Sensitivity Adjustable
Cover Open Fixed
Ribbon End Fixed
Dispenser Only available if installed
LABEL ISSUING MODES
Standard: Continuous mode, Tear -off mode, Sensor off mode
Optional mode: Dispenser mode, Cutter mode
SELF-DIAGNOSIS
Print Head Check
Cover Open Detection
Paper End Detection
Test Print
Print Head Check
Cover Open Detection
Paper Detection
Test Print
Ribbon end Detection
Ribbon near end Detection
CHARACTER FONT CAPABILITIES
BITMAP FONTS
XU 5 dots W x 9 dots H (Alphanumeric characters and symbols)
XS 17 dots W x 17 dots H (Alphanumeric characters and symbols)
XM 24 dots W x 24 dots H (Alphanumeric characters and symbols)
XB 48 dots W x 48 dots H (Alphanumeric characters and symbols)
XL 48 dots W x 48 dots H (Alphanumeric characters and symbols)
OA Font (OCR-A)
15 dots x 22 dots
(Alphanumeric
characters and
symbols)
22 dots x 33 dots
(Alphanumeric
characters and
symbols)
15 dots x 22 dots
(Alphanumeric
characters and
symbols)
22 dots x 33 dots
(Alphanumeric
characters and
symbols)
OB Font (OCR-B)
20 dots x 24 dots
(Alphanumeric
characters and
symbols)
30 dots x 36 dots
(Alphanumeric
characters and
symbols)
20 dots x 24 dots
(Alphanumeric
characters and
symbols)
30 dots x 36 dots
(Alphanumeric
characters and
symbols)
KANJI FONTS
Supported by downloading one of the following kanji fonts.
1) Japanese (16 x 16, 22 x 22, 24 x 24/ Kaku Gothic (JIS X 208))
2) Chinese (24 x24 GB2312)
3) Korean (24 x 24 KSX1001)
RASTER FONTS
CG Times (Alphanumeric characters and symbols)
CG Triumvirate (Alphanumeric characters and symbols)
OUTLINE FONTS
Alphanumeric characters and symbols
To Next Page
Loading...
Need help?
General
