Section 6: General Specifications
CG2 Series Operator Manual Page 6-7
6.2 OPTIONAL ACCESSORIES SPECIFICATIONS
CUTTER SPECIFICATIONS
Media Type Non-adhesive paper and Label
Media Size
Pitch including liner: 25 to 603 mm (0.98” to 23.74”) (For CG208TT/ CG208DT)
Pitch including liner: 25 to 403 mm (0.98” to 15.87”) (For CG212TT/ CG212DT)
Width including liner: 15 to 63 mm (0.59” to 2.48”)
Thickness 0.06 to 0.16 mm (0.002 to 0.006 in.)
Dimensions
W 108 X D 50 X H 98 mm
(W 4.25” X D 1.97” X H 3.86”)
Weight 0.3 kg (0.66 lbs)
DISPENSER SPECIFICATIONS
Media Type
Label only
* Some restrictions may apply to some label types depending on the substrate,
adhesive, paper size, and environment. Refer to SATO representative on the
labels to be used.
* Split liner cannot be used for this model.
* Perforated liner cannot be used for this model.
Media Size
Width: 12 to 60 mm (0.47” to 2.36”)
Width including liner: 15 to 63 mm (0.59” to 2.48”)
Pitch: 22 to 100 mm (0.87” to 3.94”)
Pitch including liner: 25 to 103 mm (0.98” to 4.06”
)
Thickness 0.06 to 0.19 mm (0.0024” to 0.0075”)
Sensor Type Dispenser sensor (Reflective)
Dimensions
W 108 X D 35 X H 95 mm
(W 4.25” X D 1.38” X H 3.74”)
Weight 0.12 kg (0.26 lbs)
To Next Page
Loading...
Need help?
General
