Section 7: Interface Specifications
Page 7-6 CG2 Series Operator Manual
7.3 UNIVERSAL SERIAL BUS (USB) INTERFACE
This printer supports the USB 2.0-compliant interface and the transfer rate at 12.5 Mbits/second. The
Universal Serial Bus (USB) interface requires a driver (shipped with each printer) that must be loaded on your
PC and the PC must be configured to support USB peripherals using Windows2000/XP/Server2003/Vista.
Details for loading the USB driver are contained in the CD-ROM that is shipped with each printer. Up to 127
devices may be connected to a USB port using powered hubs.
7.3.1 Basic Specifications of USB interface
The USB interface is available with both Type 1 and Type 2 boards.
Interface connector
Series B plug
Cable length: 5m or less (Twisted Pair Shielded)
Version USB 2.0
Maximum receive
buffer capacity
1MB
Interface type Use Printer configuration tool or <DI> command.
<DI>a
For Type 1 board,
Parameter Item Value Description
a Interface
0 USB/W-LAN [Default]
1 RS-232C
2Keypad
For Type 2 board,
Parameter Item Value Description
a Interface
0 USB [Default]
1LAN
2Keypad
Near full occurred
Near full released
0MB
1MB
Remaining 0.25MB
Remaining 0.5MB
To Next Page
Loading...
