SATO CG2 Series - Appendix; Paper End; Ribbon End

Section 8: Appendix
CG2 Series Operator Manual Page 8-1
APPENDIX
The following information is provided:
• 8.1 Optional Accessories - Cutter
• 8.2 Optional Accessories - Dispenser
• 8.3 Positions of sensors and options
• 8.4 15mm (0.6”) Wide Wristband
• 8.5 Operation Mode Selection
• 8.6 Base Reference Point
• 8.7 Offset position Adjustment
• 8.8 Paper End
• 8.9 Ribbon End