SBC PCD2.M5 Series - Profibus DP Master, Module PCD7.F7500

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG Communication interfaces
5
5-27
Communication on Slot C
5.7.2 ProbusDPMaster,modulePCD7.F7500
TheProbusshouldbeconnecteddirectlytothePCD7.F7500module.
PCD2.M5_
PCD7.F7500 PCD7.F7500
forconnectionasProbusDPMaster(12MBit/s).
D-Sub 9 pole pin allocation
Socket C
Connection type D-Sub9-pole(female)
signal Pin no
RTS / CNTR-P 4
PGND Threaded bolts
RxD / TxD-N 8A(green)
RxD / TxD-P 3B(red)
DP GND 5
DP +5 V 6
Detailscanbefoundinmanual26 / 765"ProbusDP".
Toavoidreections,eachsegmentmustbeterminatedatthelineends.According
totheProbusstandard,thiscannotbedoneonthedevice.ThePCD7.T160
terminationboxesorstandard9-poleProbusDPD-Subconnectorsaresuitablefor
this.