SBC PCD2.M5 Series - System Cables and Adapters; System Cables with I;O Module Connections to the PCD

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
System cables with I/O module connections to the PCD
System cables and adapters
7-1
7
7 System cables and adapters
7.1 System cables with I/O module connections to the PCD
Theroutetoeasy,fastconnectionisviathesepreconguredcables.Theconnectoris
ready mounted at the PCD end of the cable, so it just has to be plugged in to connect.
At the process end there are ribbon connectors to the terminal adapters or the relay
interface, or 0.5 mm
2
or 0.25 mm
2
strands, numbered and colour-coded.
All cables are described in Manual 26-792 'System cables and adapters'.