SBC PCD2.M5 Series - Module Overview

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG Communication interfaces
5
5-17
Serial interfaces on I/O module slots 0 - 3
A2
A1
C
PCD2.M5540
0
321
E/A-Slots
7
456
Port
100
------
Port
101
Port
120
------
Port
121
Port
130
------
Port
131
Port
110
------
Port
111
5.5.3 Module overview
ThePCD2.F2xxxcommunicationmodulesaredesignedforthePCD2.M5_systems.
Eachmodulehastwoserialports,onexedinterfaceandasecondthatcanbe
establishedbytheuseofaPCD7.F1xxmodule.
PCD2.F2100
Serial communication module with two serial
interfaces
Port x.0: RS-422 / RS-485
 (xedonPCD2.F2100module)
Portx.1: SlotforPCD7.F1xxmodule
PCD2.F2210
Serial communication module with two serial
interfaces
Port x.0: RS-232
 (xedonPCD2.F2210module)
Portx.1: SlotforPCD7.F1xxmodule
PCD2.F2810
Serial communication module with two serial
interfaces
Port x.0: Belimo MP-Bus
 (xedonPCD2.F2810module)
Portx.1: SlotforPCD7.F1xxmodule
Usable PCD7.F1xx modules(forconnectiontoportx.1onthePCD2.Fxxxx)
PCD7.F110 SerialinterfacemoduleRS-422 / RS-485
PCD7.F121 SerialinterfacemoduleRS-232, for modem connection
PCD7.F130 Serialinterfacemodule,currentloop20mA
PCD7.F150 Serialinterfacemodule,RS-485, electrically isolated
PCD7.F180 SerialinterfacemoduleforBelimoMPbus,
for max. 8 actuators and sensors
I/O Bus
Conne c t
Port x.0
2x5 Pol
Port x.1
2x5 Pol
Micro -
controller
I/O Bus
Interface
Port x.0
Port x.1
PC D7.F1xx
RS232
RS485/422
TTY
Belimo
C
O
Switch for line
termination
(only PCD2.F2100)