Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Digital input modules
Input/output (I/O) modules
6-9
6
6.2.2 PCD2.E160/161,16digitalinputs,ribboncableconnector
Application
Low-cost input module for source or sink operation with 16 inputs, electrically
connected. Suitable for most electronic and electromechanical switching elements
at 24 VDC. The PCD2.E161 differs from the PCD2.E160 in its shorter input delay,
typically 0.2 ms.
Technical data
Number of inputs: 16 electrically connected,
source or sink operation
Input voltage E160:
E161:
24 VDC (15…30 VDC)smoothed or pulsed
24 VDC (15…30 VDC)smoothed max. 10 % residual ripple
Input current: 4 mA per input at 24 VDC
Input delay E160:
E161:
typically 8 ms
typically 0.2 ms
Resistance to interference:
acc. to IEC 1000-4-4
2kVundercapacitivecoupling(wholetrunkgroup)
Internal current consumption:
(from+5Vbus)
1 … 72 mA
typ. 36 mA
Internal current consumption:
(fromV+bus)
0 mA
External current consumption max.64mA(allinputs=1)at24VDC
Terminals: 34-pole ribbon cable connector
LEDs and connection terminals
Bus connector
Bus interface and
Threshold switch
Input circuits
LEDs (3 colour)
Ribbon cable
connector
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33
E15 E0E8 E7
L L L L L L L L
E15
E14
E13
E12
E11
E10
E9
E8
E7
E6
E5
E4
E3
E2
E1
E0