SBC PCD2.M5 Series - Browse the Edisplay Pages on the PC

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
E-display with PCD7.D3100E nano-browser
PCD2.M5_ Classic CPUs and expansion housings
3-69
3
3.19.8 BrowsetheeDisplaypagesonthePC
Browse the setup menu pages on the PC
Thesetupmenupages(x6)arepartandparcelofthePCD2rmware.
As any web pages, you can browse the setup menu pages on a PC.
ActuallythesetupmenuwascompiledwithWeb-editor5_14_27,theimasterleis
IMasterSaia5_14_27.jar
What’sthedrill?CopytheIMasterSaia5_14_27.jarintotheashmodulePCD7.
R550xxx.
Browsesetupmenuhtmllesin3differentsizes:
Scale 1:1→http://IPaddress/saiaedsetup.html
Scale 3:1→http://IPaddress/saiaedsetupx3.html
Scale 5:1→http://IPaddress/saiaedsetupVGA.html
(thescale5:1allowstodisplaythesetuppagesin~VGAsize→640x440pixels)
→Tousethisfeature,theleIMASTERSAIA5_14_27.JAR needs to be copied on the
ashmodulePCD7.R550.
Browse the User project pages on the PC
As any web pages, you can browse your user project on a PC.
-IMASTERSAIAx_xx_xx.JARisnecessary!
Use the same IMasterSaia5_14_27.jar version number as your web-editor version.
If you compile your user project with the Web-editor 5.14.27. you need the IMaster-
Saia5_14_27.jar to browse the project on the PC.
If you compile your user project with a new Web-editor 5.nn.nn version, you need the
IMasterSaia5_nn_nn.jar to browse the project on the PC.
What’sthedrill?CopytheIMasterSaia_5_14_27.jarorotherintotheashmodule
PCD7.R550xxx.(TheIMasterSaia5_x,xx.jarversionmustalwaysbecorrespondingto
theweb-editorversion)
UsethescalablefunctionoftheWebEditortocreatescalablehtmlles.
We suggest to use the scale x3 or x5 in order to increase the teq pages with the
samerationasthethesetupmenupages(seechapter7.1)