SBC PCD2.M5 Series - PCD2.H112, General Purpose Counting and Measuring Module up to 100 Khz, 2 Channel

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
PCD2.H150
Input/output (I/O) modules
6-96
6
Watchdog: This module cannot be used on the base address 240, because it would
interactwiththewatchdog,andwouldcauseamalfunction.Fordetails,pleaserefer
to the "Watchdog" section, which describes the correct use of the watchdog in con-
junction with PCD2 components.
6.15.3 PCD2.H112,generalpurposecountingandmeasuringmodule
upto100kHz,2channel
Forfurtherdetails,pleaserefertomanual26/755"PCD2.H110-Universalcounting
and measuring module".
Watchdog: This module cannot be used on the base address 240, because it would
interactwiththewatchdog,andwouldcauseamalfunction.Fordetails,pleaserefer
to the "Watchdog" section, which describes the correct use of the watchdog in con-
junction with PCD2 components.