Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Digital input modules
Input/output (I/O) modules
6-12
6
6.2.3 PCD3.E165/166,16digitalinputs,cageclampterminalconnectors
Application
Low-cost input module for source or sink operation with 16 inputs, electrically
connected. Suitable for most electronic and electromechanical switching elements
at 24 VDC. The PCD2.E166 differs from the PCD2.E165 in its shorter input delay,
typically 0.2 ms.
Technical data
Number of inputs: 16 electrically connected,
source or sink operation
Input voltage E165:
E166:
24 VDC (15…30 VDC)smoothed or pulsed
24 VDC (15…30 VDC)smoothed max. 10 % residual ripple
Input current: 4 mA per input at 24 VDC
Input delay E165:
E166:
typically 8 ms
typically 0.2 ms
Resistance to interference:
acc. to IEC 1000-4-4
2kVundercapacitivecoupling(wholetrunkgroup)
Internal current consumption:
(from+5Vbus)
1 … 72 mA
typ. 36 mA
Internal current consumption:
(fromV+bus)
0 mA
External current consumption max.64mA(allinputs=1)at24VDC
Terminals: Springterminalconnection(notpluggable),forwiresupto
max. 0.5 mm
2
(1xAWG20)
LEDs and connection terminals
Bus connector
Bus interface and
Threshold switch