SBC PCD2.M5 Series - Analogue Output Modules, Electrically Isolated; Pcd2.W6 X5, Analogue Outputs, Electrically Isolated, 6 (4) Channels; Bit Resolution

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Analogue output modules, electrically isolated
Input/output (I/O) modules
6-74
6
6.11 Analogueoutputmodules,electricallyisolated
PCD2.W605 6 analogue outputs 10 bit resolution, 0..10 V
PCD2.W615 4 analogue outputs 10 bit resolution, 0..10 V
PCD2.W625 6 analogue outputs 10 bit resolution, 0..10 V
Galvanic separation of outputs to PCD, channels themselves not separated
I/O modules and I/O terminal blocks may only be plugged in and removed when the
PCD and the external +24 V are disconnected from the power supply.
6.11.1 PCD2.W6x5,analogueoutputs,electricallyisolated,6(4)channels,
10 bit resolution
Application
High-speedoutputmoduleforgeneraluse,electricallyisolated,6(4)channels,each
with 10 bit resolution. Different variants for voltage 0..10 V, -10 V...+10 V and current
0..20 mA are available.
Module overview Channels Resolution
PCD2.W605: Voltage 0..10 V 6(O0 … O5) 10 mV
PCD2.W615: Current 0...20 mA 4(O0 … O3) 20μA
PCD2.W625: Voltage -10..10 V 6(O0 … O5) 20 mV
Technical data
Output ranges: see module overview
Galvanic separation: 500 V, electrical isolation of outputs to PCD,
channels themselves not separated
Resolution(digitalrepresentation): 10bit(0 … 1023)
Load resistance: W605:  >3kΩ
W615:  <500Ω*
W625:  >3kΩ
Accuracy at 25°C W605: ± 0.4 %
W615: ± 0.7 %
W625: ± 0.4 %
Temperatureerror(0 … +55 °C) ± 0.25 %, 100 ppm/K or 0.01 %/K
Short circuit protection: yes(permanent)
EMC protection: acc. to standards ENV 50141, EN 55022,
EN 61 000-4-2, EN 61 000-4-4, EN 61 000-4-5
Timeconstantofoutputlter: W605: typ. 1 ms
W615: typ. 0.3 ms
W615: typ. 1 ms
Internal current consumption:
(from+5Vbus)
W605: 110mA(typ.80mA)
W615: 55mA(typ.45mA)
W625: 110mA(typ.80mA)