EasyManua.ls Logo

SBC PCD2.M5 Series - PCD2.G410, Multi-Functional I;O Module with Elect. Isolated Digital I;O

SBC PCD2.M5 Series
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Multi-functional input/output modules
Input/output (I/O) modules
6-46
6
6.7.2 PCD2.G410,multi-functionalI/Omodulewithelect.isolateddigitalI/O
Application
Combined module with digital and analogue inputs and outputs. This module is
designed to extend the range of uses for the PCD. The functions and the technical
specicationarebasedontheexistingPCD2modules.
This module cannot be installed in the PCD1.
The technical details should be taken from the descriptions of these modules.
Number and type of inputs/outputs
16 digital inputs,electricallyisolated,I0…I15,(addresses0…15).
Tech. data as for PCD2.E610,
Source or sink operation selectable via "Q/S" jumper.
4 relay outputs,O16…O19(addresses16…19),
Each with a changeover contact protected with 2 varistors.
Tech. data as for PCD2.A200.
The24Vsupplytotherelaycoilsisviathescrewlessterminals“U
ext
”,located
next to the 4 relays.
4 analogue outputs,with8bitresolution,O32...O35(baseaddr32*,channels0...3)
Each channel selectable with "U/I" jumper for voltage 0...10 V or current
0...20 mA.
Tech. data as for PCD2.W410.
4 analogue inputs,with10bitresolution,I48...I51(baseaddr48*,channels0...3)
Eachchannelcanbeconguredseparatelywiththejumpercombinations
shownforvoltage0…10V(“U”),current0...20mA(“I”)
orforresistivetemperaturesensorsPt/Ni1000(“T”)foratemperaturerange
from-20…+100°C.
Tech. data as for PCD2.W2xx.
Internal current consumption from +5 V bus 10 … 50 mA
V+ Bus 10 … 40 mA
24Vconnection(U
ext
): Thisislocatednexttothe4relaysasscrewlessterminal
“U
ext
”.
The 24 V supply is common to the relay coils and the
external supply to the analogue outputs.
Current consumption: 9 mA per relay
20 mA per analogue output
*(whenthemoduleisinstalledonsockets1…4onthePCD2).

Table of Contents

Related product manuals