SBC PCD2.M5 Series - Annex Icons

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Icons
Annex
A-1
A
A Annex
A.1 Icons
In manuals, this symbol refers the reader to further information in this manual or
other manuals or technical information documents.
As a rule there is no direct link to such documents.
This symbol warns the reader of the risk to components from electrostatic
discharges caused by touch.
Recommendation: Before coming into contact with electrical components, you
shouldatleasttouchtheMinusofthesystem(cabinetofPGUconnector).Itis
better to use a grounding wrist strap with its cable permanently attached to the
Minus of the system.
This sign accompanies instructions that must always be followed.
Explanations beside this sign are valid only for the SBC PCD
®
Classic series.
Explanations beside this sign are valid only for the SBC PCD
®
xx7 series.