SBC PCD2.M5 Series - Operation

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
MemorymodulePCD3.R600forashcards(FCs)
PCD2.M5_ Classic CPUs and expansion housings
3-44
3
3.13.3 Operation
ThePCD2.R6000canonlybeinsertedintoI/Oslot0...3(0,16,32,48)ona
PCD2.Mxxxx.Thermwaredetectsthesemodulesatstart-upandinstallsthe
necessary drivers. Do not insert or remove the modules with the power on.
Up to 4 PCD2.R6000 units can be used in a PCD2 system.
Insertion of I/O modules
The I/O modules are inserted from the side, pushed towards the middle of the unit
until they reach the end stop and snap into the retaining catch.
Retaining clip Bus connector
A2
A1
I/O-sockets
C
PCD2.M5540
0
321
7
456
Data access
Browser
FTP-Client
Explorer
FTP-Server
Web
pages
Any
data/files
Flash memory with file system
PCDx.R55xM04, PCD2.R6000
(4 Mbyte - 1 GByte max.)
User program,
Web pages
Onboard memory,
and PCD7.R500
for backup
(512 kByte max.)
Web-Server
PG5
Ethernet-TCP/IP
User program
with new CSF,
SFB instruc-
tions
PCD data
memory
DB/X, R, F, ...
PCD2.Mxxxx
FTPserverandlesystemaccesscanonlybeachievedwiththeplug-inash
memorymodule.AccessviaFTPserverisonlypossibleviatheEthernetTCP/IP
interface.
Basedonthepredenedrequirements,SBCusesitsownlesystem.TheSBCle
systemisembeddedinaFAT(PCcompatiblelesystem)framework,tomakethe
restricted processes when used in a commercial SD card reader/writer visible with