SBC PCD2.M5 Series - Configuration and Programming; Cpus; Configuring the PCD with

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
CPUs
Conguration
8-1
8
8 Congurationandprogramming
8.1 CPUs
This section assumes that the user is familiar with the PG5 software. If not, please
refertoManual26/733“PG5”.
8.1.1 ConguringthePCDwithPG5
ConnectingthePCDtothecongurationwithPG5:
 Start up PG5
 Create new project:
●Clickon“New…”
●The“NewProject”dialogueisdisplayed
Creating and opening a new project.
Thedialogueboxisbroughtupvia“File/NewProject”.Thesizeofthedialogue
box can be changed by dragging the bottom right corner or by dragging the
frame.