SBC PCD2.M5 Series - Memory Module PCD2.R6000 for Flash Cards (Fcs); System Overview; Technical Data

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
MemorymodulePCD3.R600forashcards(FCs)
PCD2.M5_ Classic CPUs and expansion housings
3-43
3
3.13 MemorymodulePCD2.R6000forashcards(FCs)
3.13.1 System overview
ThePCD2.R6000isanI/OmoduleforindustrialSecureDigital(SD)ashcard
applications, for which it can be inserted into I/O slots 0...3 on a PCD2.Mxxxx. The
SD cards can be removed with the power on.
The SD cards can be accessed in 3 different ways:
● ViaEthernetTCP/IPwithFTPserver
● WithabrowserviaPCDwebserver
● WiththePCDprogram,usingalesystemlibrary
3.13.2 Technical data
PCD2.R6000 module
PowerconsumptionwithoutSDashcard 15 mA
Max.powerconsumptionincl.SDashcard 100 mA
Display 5 LEDs
Operating mode setting BCD switch
Card holder and detection switch With label clip
Required properties of SD ashcard (as tested by SBC)
Capacity supported 128, 256, 512 MB, 1 GB
Technology Single-level cell
Service life 600,000 or more programming/deletion
cycles
Data retention 5 years or more
Operating temperature -25°C...+85°C or better
MTBF 1,000,000 hours or better