SBC PCD2.M5 Series - Remove Cover from Housing

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Mounting
PCD2.M5_ Classic CPUs and expansion housings
3-19
3
3.5.2 Removecoverfromhousing
NB: Do not use earlier methods. They may cause damage.
Gripbothsidesofthehousingwiththengersandpushtotheleft.
Afterremovingthecover,theplugboardsforashcards,thelithiumbattery,therun/
halt switch etc. are freely accessible.
Lithium-
battery
Flash-
cars
Run/Halt-
switch
Aperture for
LCD-display
and keys